Report
Where it is
Section titled “Where it is”Setup tree: Report
Controls
Section titled “Controls”Report
Section titled “Report”- Control: value (
ValueField) - Default: empty
- Bound to:
ReportState.title - Value modes: none (plain entry)
Blank uses the case name.
Author
Section titled “Author”- Control: value (
ValueField) - Default: empty
- Bound to:
ReportState.author - Value modes: none (plain entry)
- Control: value (
ValueField) - Default: empty
- Bound to:
ReportState.notes - Value modes: none (plain entry)
Appears under the case summary.
Document control
Section titled “Document control”Project
Section titled “Project”- Control: value (
ValueField) - Default: empty
- Bound to:
ReportState.projectNumber - Value modes: none (plain entry)
Client
Section titled “Client”- Control: value (
ValueField) - Default: empty
- Bound to:
ReportState.client - Value modes: none (plain entry)
Revision
Section titled “Revision”- Control: value (
ValueField) - Default: empty
- Bound to:
ReportState.revision - Value modes: none (plain entry)
Checked by
Section titled “Checked by”- Control: value (
ValueField) - Default: empty
- Bound to:
ReportState.reviewer - Value modes: none (plain entry)
The second name on an issued document - who checked it, as distinct from who prepared it.
Status
Section titled “Status”- Control: choice (
ComboRow) - Default: empty
- Bound to:
ReportState.documentStatus - Options: ``,
Draft,For review,For approval,Issued,Superseded(fromReportState.documentStatusOptions)
Empty for a document that is not issued under a status.
+ Add a field
Section titled “+ Add a field”- Control: action (
ToolButton2)
Sections
Section titled “Sections”Key results and verification
Section titled “Key results and verification”- Control: on/off (
ToggleRow) - Default:
true - Bound to:
ReportState.includeKeyResults
The answer, and whether it can be trusted: forces in newtons as well as coefficients, pressure drop, and a checklist of convergence, mass balance, y+, Mach and mesh quality against the thresholds each one is judged on.
Where the design loses
Section titled “Where the design loses”- Control: on/off (
ToggleRow) - Default:
true - Bound to:
ReportState.includeDesign
The split of drag into pressure and friction, and the loading on each surface - which is what a shape change actually moves.
Case summary
Section titled “Case summary”- Control: on/off (
ToggleRow) - Default:
true - Bound to:
ReportState.includeSummary
Snapshots
Section titled “Snapshots”- Control: on/off (
ToggleRow) - Default:
true - Bound to:
ReportState.includeView
… kept. Managed below.
Geometry
Section titled “Geometry”- Control: on/off (
ToggleRow) - Default:
true - Bound to:
ReportState.includeGeometry
- Control: on/off (
ToggleRow) - Default:
true - Bound to:
ReportState.includeMesh
Physics and materials
Section titled “Physics and materials”- Control: on/off (
ToggleRow) - Default:
true - Bound to:
ReportState.includePhysics
Boundary conditions
Section titled “Boundary conditions”- Control: on/off (
ToggleRow) - Default:
true - Bound to:
ReportState.includeBoundaries
Numerics and run control
Section titled “Numerics and run control”- Control: on/off (
ToggleRow) - Default:
true - Bound to:
ReportState.includeNumerics
Results and field ranges
Section titled “Results and field ranges”- Control: on/off (
ToggleRow) - Default:
true - Bound to:
ReportState.includeResults
The minimum and maximum of every field — the table that makes a report checkable rather than just decorative.
Boundary patch data
Section titled “Boundary patch data”- Control: on/off (
ToggleRow) - Default:
true - Bound to:
ReportState.includePatches
Area, mean velocity and volumetric flow for every patch - the table a mass balance can be checked from.
Mesh quality and run
Section titled “Mesh quality and run”- Control: on/off (
ToggleRow) - Default:
true - Bound to:
ReportState.includeQuality
Read back out of the solver and checkMesh logs, not the setup.
Convergence charts
Section titled “Convergence charts”- Control: on/off (
ToggleRow) - Default:
true - Bound to:
ReportState.includeMonitors
The in-app guidance depends on the case:
- Nothing in postProcessing yet; the section will say so.
- … quantities available.
Generated file list
Section titled “Generated file list”- Control: on/off (
ToggleRow) - Default:
false - Bound to:
ReportState.includeFiles
Snapshots
Section titled “Snapshots”Working…
Section titled “Working…”Label changes with the case; the source gives these forms: Working…, Add standard views.
- Control: action (
ToolButton2) - Enabled when:
PostState.available && !ReportState.busy
- Control: action (
ToolButton2) - Enabled when:
ReportState.snapshots.count > 0
Writing…
Section titled “Writing…”Label changes with the case; the source gives these forms: Writing…, Export PDF (A4).
- Control: action (
ToolButton2) - Enabled when:
!ReportState.busy
Open the report
Section titled “Open the report”- Control: action (
ToolButton2) - Shown when:
ReportState.lastReport !== ""
Conditional and repeated groups
Section titled “Conditional and repeated groups”Per item in ReportState.customFields
Section titled “Per item in ReportState.customFields”repeated once for every entry in ReportState.customFields
- Control: value (
ValueField) - Value modes: none (plain entry)
- Control: value (
ValueField) - Value modes: none (plain entry)
✕
- Control: action (
ToolButton2)
Per item in ReportState.snapshots
Section titled “Per item in ReportState.snapshots”repeated once for every entry in ReportState.snapshots
Caption
Section titled “Caption”- Control: value (
ValueField) - Value modes: none (plain entry)
Problems reported against this step
Section titled “Problems reported against this step”The application reports no problems against this step.
… marks a value the application computes at run time, so the source carries no fixed text for it.