Thermal material
Where it is
Section titled “Where it is”Not a setup-tree node. Embedded in the application.
Controls
Section titled “Controls”MATERIAL
Section titled “MATERIAL”Browse…
Section titled “Browse…”- Control: action (
ToolButton2)
Conductivity λ
Section titled “Conductivity λ”- Control: value (
ValueField) - Unit: W/m/K
- Value modes: none (plain entry)
THERMAL MASS
Section titled “THERMAL MASS”Density ρ
Section titled “Density ρ”- Control: value (
ValueField) - Unit: kg/m³
- Value modes: none (plain entry)
- Shown when:
ThermalState.analysis === "Transient"
Specific heat Cp
Section titled “Specific heat Cp”- Control: value (
ValueField) - Unit: J/kg/K
- Value modes: none (plain entry)
- Shown when:
ThermalState.analysis === "Transient"
The solver wants the product ρ·Cp, which is what actually sets the time constant. Both are asked for here because that is how they are published.
Problems reported against this step
Section titled “Problems reported against this step”The application reports no problems against this step.
… marks a value the application computes at run time, so the source carries no fixed text for it.